DIY Wall Repair Spray Paint

Name: DIY Wall Repair Spray Paint
Brand: Shenzhen Sunrise New Energy Co.,Ltd.

7CF® DIY Wall Repair Spray Paint is an environmentally friendly water-based aerosol paint with excellent performance such as low VOC, low odor, simple construction operation, good spray atomization, high spray rate and strong coverage. Wall stains, wall peeling, graffiti can easily be covered! Excellent alkali resistance and mildew resistance, good scrub resistance. Rich in color, ideal for DIY personalized painting.

WHERE TO BUY

DIY WALL REPAIR SPRAY PAINT FEATURES & BENEFITS

Environmentally-friendly and Strong coverage
Easy to use
Excellent for wall stains, wall peeling, graffiti

DIY WALL REPAIR SPRAY PAINT APPLICATIONS

Widely used for decoration, repair and renovation of interior walls, ceilings, gypsum boards and wooden partitions of buildings such as residences, schools, office buildings, hotels, etc. It is especially suitable for small area repair and painting, and can also be used for DIY personalization artistic painting. It can make signs and marks in indoor public places, and is not recommended for outdoor environments.

DIRECTION

1
After treating the substrate, shake can vigorously about 2 minutes
2
About 15-25cm away from the surface of the object to be sprayed, spray at a uniform speed.
3
Generally, spray 2-3 times with a thickness of 20-30 μm. The interval between each time is based on the surface dryness of the paint film.
4
Construction is not recommended when the humidity is greater than 85% or the temperature is lower than 5°C.
5
If the spray is not finished at one time, turn the aerosol upside down and press down the nozzle for 2~3 seconds to clean out the nozzle and prevent clogging.

PHYSICAL & CHEMICAL PROPERTIES OF DIY WALL REPAIR SPRAY PAINT

Physical and chemical properties
Appearance:	Aerosol	Odour:	Light
Specific Gravity(g/ml):	1.10~1.20	Relative density (water=1):	1.1-1.2 (25℃)
Solids by Weight:	≥10%	Flashpoint:	＜0℃
Viscosity:	< 100S（25℃）	Boiling point (℃):	N/A
PH:	6.0-9.0	Touch Dry Time:	≤1 hour
Gloss:	Not applicable	Recoat time:	≥2 hours
Solubility:	Soluble in water	Explosiveness:	The product generally does not explode, but the ejecta mixed in the air and open fire can cause an explosion
Coating Content:	100-120g/m^2/time	Construction Environment:	Temperature 25℃, Humidity ≤60%