7CF® Acrylic Spray Paint is made from thermoplastic acrylic resin and it can be applied by aerosol spray and provide films with excellent performance such as excellent weather resistance, good leveling, strong coverage, fast dry, high build, and match well with many types of primers.
Good spray atomization
High spray rate
High film fullness
Excellent decorative effect
Superior adhesion and durability
Indoor/outdoor use with maximum rust protection
No sanding or priming required
Fade and chip resistant
Excellent protection against impact, UV, etc.
Acrylic spray paint is widely used for all interior/exterior applications, for surface finishing of iron & steel, plastics, metals, surface-treated wood, glass, and other substrates.
Household items: shelf, bench, chair, table, vase, refrigerator, fan, bicycle, helmet, motor, stationery holder, wicker chair, petrified plants, DIY
Agricultural equipment: garden tools, fence, etc.
Thoroughly remove dirt, grease, oil, and water on the surface to be painted.
Fill the recessed part with Poly-Putty Base and smooth it.
Shake the acrylic spray paint can vigorously for two minute after the mixing ball begins to rattle, until the paint is fully mixed and uniform.
Hold the acrylic spray paint can upright 20-30cm from surface and use your index finger to press down the nozzle to spray in a steady back and-forth motion.
Apply in thin multiple layers, thin layers every 2 minutes are always better than one thick on.
If the acrylic spray paint is not finished at one time, turn the aerosol upside down and press down the nozzle for 3 seconds to clean out the valve and prevent plugging.
Film flat and smooth, no mechanical impurities, accord with the confirmed sample.
Touch dry ≤15 minutes,
finger press dry ≤ 1 hour
Under the temperature of 20℃
Dry after 48 hours
Gloss ≥80; Matt accord with the confirmed sample
60℃ gloss level, relative moisture ≤ 75%
GET IN TOUCH WITH 7CF TO LEARN MORE PRODUCT LINES