The metal zinc content of which is up to 83%.The zinc layer, using cold galvanizing as primer, can be well protected as the reason that scaly aluminum powder is parallel in the coating, which prevents the invasion of moisture and ultraviolet to the coating, enhancing the effect of anti-corrosion.While the product itself has a good antirust and anticorrosion function, which is better than automatic zinc-spraying, its mono-component can be drying at room temperature to protect the zinc coating. Due to its safety、environmental protection and durable,it is considered as a good material for the antirust of abundant steel facilities
Contains 83% pure zinc
Anti-rust and corrosion-resistant
High gloss, good weather resistance
Forms a durable, crack resistant coating
It can be used as a long-lasting anti-rust primer for steel structures in moderate to severely corrosive environments, and can also be suitable for repairing old galvanized materials.
Surface treatment: Oil, dust and water should be removed completely from the surface to be coated.
Keep shaking the can for about two minutes to mix the material sufficiently and evenly , in case of clogging . Spray the paint about 20cm above the substrate repeatedly and evenly as needed.
For repairing , coating thickness depends on the extent of damage by spraying 2-3 times back and forth.
Turn the can upside down and press nozzle for few seconds to purge the valve until only gas comes out.
Physical and chemical properties | |||
Appearance: | gray liquid | PH： | 5-7 |
Relative density： (water=1) | 2.78 | Flash point (℃): | <0 |
Solubility： | insoluble in water | Explosiveness： | The raw material generally does not explode, but it can cause explosion when mixed in the air |
ITEM NO. | Container size | Optional sizes |
A-S-015 | 10oz(283g) | 8oz(226g), 9oz(255g) |
GET IN TOUCH WITH 7CF TO LEARN MORE PRODUCT LINES
English 
Español 
日本語 
한국어 
français 
Deutsch 
italiano 
русский 
português 
العربية 
tiếng việt 
